Disinfecting Against Avian Influenza Using Prevail® Concentrate
GETTING STARTED
Dilute Prevail™ Concentrate to the desired concentration. AHP1750 test strips should be used regularly to confirm proper dilution.
| SELECT YOUR DILUTION | ADD Prevail® CONCENTRATE | ADD WATER |
| Pre-Soak – 1:128 | 8 mL | 1 L |
| Disinfection – 1:40 | 25 mL | 1 L |
CLEANING AND DISINFECTING
1 . Dry Clean (Remove Solid Waste)
Using a shovel or scraping tool, remove as much debris and organic matter as possible. Starting at the top of the building and working down to the floors from one end of the building to the other.
2. Pre-Soak (if required)
Pre-soak all surfaces and equipment with Prevail® Disinfectant using a dilution of 8 mL/L of water (1:128) – see diagram 1 for dilution directions. Apply from the bottom to top.
3. Rinse with Water
Rinse with high pressure washer (>1000 psi), working from top to bottom. Use hot water if available.
4. Disinfect
For routine disinfecting apply Prevail® Disinfectant using a dilution of 100 mL per 4 L of water (1:40) – see diagram 1 for dilution directions.
A foaming application is recommended to help cover surfaces quickly.
Using water and pressure from power washer lines, attach foaming gun properly adjusted to deliver 1:40 dilution. Move foaming gun quickly and evenly, cover all surfaces and equipment with foam, moving from the bottom up.
5. Wait 5 Minutes
Wait for the required contact time of 5 minutes to be reached. No need to rinse or wait for surfaces to dry.
